Uncategorized

Does Footfall Actually Increase Slip Risk?

Footfall increases slip risk by multiplying the hazards that already exist, rather than creating a slip hazard by itself. More people bring in more moisture, wear floors faster and expose more customers to any weak spot. A busy floor is therefore one where problems appear sooner, but a floor with good grip, well maintained, can handle heavy use safely.

The short why

Footfall is a multiplier. It does not make a floor slippery on its own. It increases how much water, dirt and wear a floor takes, and how many people are exposed if grip is poor. In a store with heavy trade, those effects build up quickly.

How does footfall change what is on the floor?

Every customer who walks in on a wet day brings moisture on their shoes, coats, umbrellas and bags. At busy times, that adds up to a large and steady volume of water, particularly around entrances and the first few metres inside.

Footfall also brings more spills, food, drinks and packaging, and more debris from shopping bags and trolleys. Contamination is the first factor in the CHIMES framework, and in a busy store it is rarely a one-off event. It is a steady flow, which can outpace a cleaning schedule built around occasional spills.

How does footfall change the floor itself?

Feet and wheels wear surfaces. Over months and years, the routes people walk most can become smoother than the rest of the floor. A surface that had good grip when installed can lose it gradually, without any visible change.

This is why the busiest routes, such as the line from the entrance to the till or from the doors to the escalators, often deserve the most attention. The wear is concentrated where footfall is concentrated. It also means a test result from a refit says little about how the same route performs today.

What else about busy trading affects risk?

Footfall is not only about volume. How people move matters too. Using CHIMES, a few factors stand out:

  • Individual: shoppers hurry, carry bags, push trolleys and look at displays rather than the floor
  • Heel: footwear varies hugely across a crowd and cannot be controlled
  • Environment: crowds make it harder to see a wet patch or a change of level, and peaks such as sales weekends and wet-weather surges change conditions quickly
  • Maintenance: heavy footfall makes it harder to clean without disruption, so work often happens when customers are present

These effects interact. A surge of people on a wet day, on a floor that has worn smooth, with shoppers hurrying, is exactly when a slip is most likely.

Doesn’t a quiet incident log mean busy floors are fine?

This is the belief worth challenging directly. No incidents does not mean no problem. Most slips go unreported, and near misses are the real warning sign. In a busy store, a customer who slips, catches themselves and carries on with their shopping will never appear in your data.

A clean record can also hide a floor that has simply not been tested hard yet. Grip is invisible. A floor can look spotless and dry and still have poor slip resistance, particularly where years of footfall have worn the surface smooth. You cannot judge it by eye.

Does more footfall always mean more slips?

Not automatically. More footfall means more exposure, but it does not tell you how much grip a floor has. A store with good grip, well controlled at the points where water comes in, can handle heavy use safely. That is the real point. Footfall tells you where to look first. It does not tell you how safe a floor is.

A useful way to think about it is by speed limits. Most of a store is a 70 mile an hour zone, where keeping floors clean, dry and clear of spills is enough. The busiest wet routes are 20 mile an hour zones, where you need to go further. Footfall helps you identify those zones.

How do you manage footfall-driven risk?

By measuring the grip of the busiest, wettest zones, wet as well as dry, using pendulum testing. Slip resistance is assessed using pendulum testing, the method preferred by the HSE and relied on in UK slip litigation. It produces a Pendulum Test Value (PTV), and a PTV of 36 or above is generally regarded as low slip potential. Below that, risk rises as the number falls.

Then act on what the readings show. That might mean adjusting cleaning products and methods, improving matting at entrances, or treating surfaces that have worn smooth. Re-test regularly, because footfall keeps changing the floor.

Slip Safety Services has found that organisations who measure first and then act on what they find see a 57%+ average reduction in slip incidents. Footfall helps you decide where to point that effort, so it goes where footfall and risk actually meet, rather than being spread thinly across the whole store.

What to do about it

Map your store by footfall and moisture. Identify the busiest routes and the places where water comes in, and find out when each was last tested, and whether the test was done wet. Where there is no recent, dated reading, treat that as the first gap to close.

Use footfall data you already hold, such as customer counts or peak trading times, to decide how often to re-test. The busier the zone, the shorter the gap between checks should be. This is general information, not legal advice, so check what applies to your store with your health and safety adviser.

Next step

If you are not sure how your busiest zones are performing, the Slip Prevention Scorecard takes under four minutes per building and gives you a clear starting point, with a score for each of the six CHIMES factors. For the fuller method behind measuring, improving and proving floor grip, Slipology by Christian Harris covers the process in depth.

Related questions

  • How do retailers prepare floors for the Christmas shopping rush?
  • Black Friday and Christmas footfall: managing slip risk at peak times
  • How often should retail floors be cleaned to prevent slips?
  • How does footfall affect slip risk in transport hubs?

Internal link suggestions

Leave a Reply

Your email address will not be published. Required fields are marked *